破碎机分类
推荐新闻

PCN可逆式破碎机

PCN可逆式破碎机

PCN可逆式破碎机  本公司研制的可逆式破碎机分为有筛板型和无筛板型,有筛板型通过筛板孔规格调节出料颗粒,无筛板型通过反击板与锤头的距离调节出料颗粒,可以加装液压开启装置。本设备一般作为二级破碎设备广泛用于高速公路,水库、铁路、机场等,对石料要求较高的领域,抗压强度不超过360兆帕各种物料。

  Reversible company developed the crusher consists of sieve plate and no plate, a plate type through the sieve hole size adjusting discharging particles, no sieve through the counterattack plate and hammer distance adjusting material particles, can be installed a hydraulic open device. This equipment is generally used as the two stage crushing equipment widely used in highway, railway, airport, dam, on the stone demanding areas, compressive strength less than 360 MPa of various materials.
  工作原理:
  由电机驱动破碎机转子盘,带动锤头做圆周运动,当物料由破碎机逬料口逬入破碎腔后,受到锤头的高速撞击使物料不断的高速撞击破碎,然后从反击衬板上,弹回到握头作用区,重新反击破碎,直到物料破碎至所需粒度,由机器下部排出为止。
  Working principle.
  Driven by the motor to drive the hammer crusher rotor disc, a circular motion, when the material by the crusher feeding port feed crushing cavity, high impact by the hammer impact crushing the material continuously, and then from the counterattack lining board, rebound the hammer action area, re impact crusher, crushing to the required until particle size, discharged from the lower part of the machine.
PCN可逆式破碎机
性能特点:
  1、破碎比大,破碎率高;
  2、维修方便;
  3、转子可正反转,使锤头、反击板、筛板均匀磨损;
  4、减少维修时间。
  Performance characteristics:
  1,big crushing ratio, high crushing rate.
  2,convenient repair
  3,the rotor can be positive, so that the hammer, impact plate, plate wear uniform
主要技术参数7
主要技术参数7.1

上一产品PCX超细反击式破碎机

下一产品复合圆锥破碎机

现在位置:产品中心产品中心查看此产品的用户还可以查看相同分类下的以下产品