破碎机分类
推荐新闻

PCX超细反击式破碎机

PCX超细反击式破碎机

   简介:

  PCX超细反击式破碎机优合了反击式破碎机和棰式破碎机的优点设计而成,呈目前国内g先逬的制砂设备。
  工作原理
  本超细反击式破碎机转子上安装有措落有序的板锤,在电机的筠速运转下做圆周运动,当物料进入工作腔后,受到高速板棰的择击.石料s速打向反击板及筛板,使物科在板棰、反击板、筛板的庠賻、描击下而破碎,符合要求的石料由下料口及筛板排出,大块物料由排料口排出,可回料继续破碎。该机板棰可八面更换,极大提高板棰利用率,降低生产成本。
  Introdudion:
  PCX ultrafme crusher arvd the crusher des?gn advantages and hammer crusher and sand making equipment, is currently the most advanced.
  Working pnncple
  The superfine crusher rotor is 扪stalled on the mobile plate hammer and orderly, do circular motion in high speed ruanmg of the motor, when the material into the cavity by
  high-speed plate hammer, impact, stone high speed hit to counterattack plate and plate, the material on the plate hammer, impact plate, sieve plate friction, impact the
  broken, to meet the requirements of the material discharged from the outlet and sieve p*ate, bulk material is discharged from the discharging port, can feed back to the
  broken. The board hammer eight face replacement, greatly ?nprove the utilization rate of the plate tommer. reduce the production cost.
PCX超细反击式破碎机
主要特点:
  1、板锤使用率超高,板捶可使用8面,降低生产成本;
  2、本机采用液压开启装蘆,维修方便,减小劳动强度:
  3、破碎比大,产品颗度细,赖粒饱满,是人工制砂的理想设奋;
  4、本机配用动力小,为新一代环保节能设箔。
  Main features:
  1.pidie hammer used rate high, the plate hammer can use 8 surface, reduce the prodiidion cost:
  2,the machine adopts hydraulic open device, convenient repair, reduce labor intensity
  3.big aushtig ratio, a degree of fine products, fun part?cl?s. it is the ideal equipment of artificial sand
主要技术参数16

上一产品PX强击旋锤式破碎机

下一产品PCN可逆式破碎机

现在位置:产品中心产品中心查看此产品的用户还可以查看相同分类下的以下产品