破碎机分类
推荐新闻

PF反冲击式破碎机

PF反冲击式破碎机

   简介:

  反击式破碎机在破碎高硬度物料方面,综合性能优于圆锥式破碎机和锤式破碎机。
  工作原理:
  转子茌电机的带动下高速旋转,当物料进入板锤作用区受到板锤的高速冲击,使破碎物不断被抛向安装在转子上方的反击板上,然后被弹回到板锤作用区被軍新反击,苜到物料被破碎到所需粒度,由机器下部排除。
  Introduction:
  Counterattack crusher in crushing high hardness materials, comprehensive performance is better than the
  cone crusher and hammer crusher.
  Working principle.
  The rotor rotates at high speed under the driving of the motor, when the material into the plate hammer effect
  by high speed impact plate hammer, crushing material being thrown back plate mounted on the rotor above,
  then bounced back to the plate hammer action area was re back, until the materials are crushed into the
  required size, excluded from the lower part of the machine.
PF反冲击式破碎机示意图
   性能特点:
  1、机型设计合理,性能稳定可靠,结构独特,无键连接。
  2、高铬板锤,反击板,使用寿命长。
  3、产品形状规整,粒度均匀、饱满。
  4、破碎比大,出料粒度可调,简化破碎流程。
  5、适合较硬的岩石破碎。
  适用范围:
  本产品适用于处理边长小于300mm以下、抗压强度低于350mpa的各种矿石、岩石(如花岗石、玄武岩、鞍山岩、白云石、石灰石、混凝土等)。
  Performance charactensiics:
  1.machine design e reasonable, stable and reliable performance, unique structure. Keyless connection.
  2.high chromium plate hammer, impact piate. long service Me.
  3.products with regular shape, uniform size. full.
  4.big crushing ratio, the particle size can be adjusted, simplified crushing process.
  5.suitable for hard rock crusher.
  Scope of application:
  Ttiis product is applicable to the processing length is less than 300mm, the compressive strength less than 350MpaAII kinds of ores, rocks (granite, limestone, dolomite. Xuan Wuyan Anshan rock, concrete and so on).
主要技术参数5
PF反冲击式破碎机示意图
现在位置:产品中心产品中心查看此产品的用户还可以查看相同分类下的以下产品